Large Plastic Drinking Water Tanks: Up To 40,000 Litres

Large plastic drinking Water Tanks are used by municipal water supply, events and shows, and factories for potable drinking water supply. Enduramaxx manufacture a range of large drinking water tanks in 10,0000 litres, 15,000 litres, 20,000 litres, 25,000 litres, 30000 litres and 40,000 litres capacity at our factory in Lincolnshire

Large Plastic WRAS Approved Drinking Water Tanks

Our Large WRAS Approved Drinking Water Tanks are suitable for storage of cold drinking water up to 40,000 litres. These water tanks are available in various colours – black, natural (translucent – only for use inside) and Blue – and are food-grade for storage of stock of foodstuffs and drinks. Being rotationally moulded these tanks have a smooth interior to allow easy cleaning and UV stabilised for many years of use outside.

Large DWI Approved Drinking Water Tanks

Our Large DWI Approved Drinking Water Tanks meet the specific requirements of Regulation 31.  Drinking Water Inspectorate Water – Regulation 31 ensures that water suppliers, when producing and distributing drinking water, only use products and substances that do not cause any detrimental effects on the safety or quality of the drinking water”.

What Are DWI Approved Drinking Water Approvals?

These Regulations came into effect in England in 2016 in order to comply with Article 10 of the Council of the European Union Drinking Water Directive (DWD) and applies to England and Wales. It covers all chemicals and construction products used by drinking water providers from the water’s source to the delivery point at individual consumers’ premises. Scotland and Northern Ireland are covered under their own legislation which mirrors that of England and Wales and suppliers of products and chemicals authorised by the DWI under Regulation 31 are also authorised under Scotland’s Regulation 33 and Northern Ireland’s Regulation 30.

Our Large Plastic Drinking Water Tank Range:

Code Vertical Range Std Colour Std Outlet Std Lid Dimensions (mm) Product Link
172222 10000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2400 dia x 2500 H Product Link
172224 10000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 1900 dia x 3700 H Product Link
172223 10000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2600 dia x 2220 H Product Link
172225 12500 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2600 dia x 2830 H Product Link
172229 15000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2400 dia x 3550 H Product Link
172132 15000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2600 dia x 3060 H Product Link
172230 16800 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2600 dia x 3410 H Product Link
172238 20000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2850 dia x 3600 H Product Link
172235 20800 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2600 dia x 4150 H Product Link
172250 22000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 3450 dia x 2750 H Product Link
172240 25000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 2700 dia x 4650 H Product Link
172255 25000 Litre Vertical – Low Profile Tank – 1.0 SG Black 2? 620 Non-Vented 3450 dia x 3200 H Product Link
172260 30000 Litre Vertical Tank – 1.0 SG Black 2? 620 Non-Vented 3450 dia x 3650 H Product Link

Large Insulated Water tanks

These plastic water tanks are available with external institution for where temperature regulation is key and for the prevention of overheating or freezing of liquids. This plastic tanks have an insulation system engineered to prevent condensation and effectively reduce thermal and energy loss.

For Insulation Performance Information for these insulated drinking water tank click here

Fluid Category 5 Drinking Water Tanks

Our fluid category 5 break tank for potable and non-potable water are all fully DWI approved and meet the specific requirements of Regulation 31.  These Type AB Air Gap Break Tank Cat 5 are fitted with a cowled overflow to prevent the ingress of light into the tank and a stainless-steel mesh to prevent the ingress of debris into the tank. Larger weirs can be specially made for larger inlets. More details on the WRAS Information and Guidance Note: For cold water storage cisterns and design recommendations for mains supply inlets. Download your copy here.

Rotational Moulded Large Plastic Water Tanks

Enduramaxx tanks are manufactured in Lincolnshire and able to mould water tank vessels from 50 litres up to 40,000 litres and tanks as large as 4000mm in diameter by 3900mm tall.  For more details on our Large Plastic Water Tanks, chemical tanks or to discuss manufacturing a custom bunded tank, please contact sales team or email Sales@enduramaxx.co.uk.

View a short video of a rotational melding oven in action below.

 

Get in Touch - Find Out More

 

 

Related Posts

Plastic Drinking Water Tanks UK Manufacturer: Range Up To 30,000 Litres

Enduramaxx a leading plastic drinking water tank UK manufacturer designs and manufactures a range...

1,000 Litre Water Tank: FAQ’s, Frequently Asked Questions

1,000 – litre water tank – FAQ’s – frequently asked questions on why buy an Enduramaxx 1000-litre...

Open Top Water Tanks UK Manufacturer: 400 - 25,000 Litres

Enduramaxx is a leading plastic Open Top Water Tanks UK Manufacturer which designs and manufactures...