Recycling wastewater in the stone, marble & granite cutting industry makes sense as stone fabrication shops tend to use a lot of water. So water costs are high. In addition, they have to comply with stringent regulations for the disposal of wastewater, so it makes sense to install a wastewater treatment system, to save costs and keep compliant.
Where granite blades and tools are used, or blades of quartzite, then contaminated wastewater is produced. Saws and grinders produce dust – dust that must be washed away as wastewater.
An average stone shop might use up to 15,000 gallons of water a day, as this water needs to be treated before disposal, implementing water recycling can mean a lot of savings.
The wastewater from stone fabrication contains significant pollutants as suspended particles in the water and silica dust needs to be minimized. If the treatment is inadequate, harmful contaminants can be released into the environment, including heavy metals, corrosives and flammable liquids, cyanide and other poisons.
Before installing a system to treat the wastewater you need to work out the costs – and the potential savings. Some of the questions you need to ask include:
The wastewater has to be collected in tanks. The solids separated from the liquid component to form slurry or sludge. The water decanted off for further treatment and recycling and the sludge dewatered prior to removal and disposal.
The wastewater effluent is collected in tanks. Here the process of separating the solids suspended in the liquid take place. Coagulants are added to the mix, this neutralises negative charges on molecules, so they can merge to form small particles which then aggregate together forming larger masses when flocculants are added.
These flocs sink to the bottom of the tank and can be removed. This is easy to do when the tank is conical since the sediment collects in the cone at the bottom of the tank.
Once the flocs have settled at the bottom of the tank the clarified water can be decanted off into other containers by means of openings in the sides of the tank, thus separating it from the sludge.
The sludge is the sediment that settles at the bottom of the tank. It is often semi-fluid and needs dewatering before disposal.
The slurry must be separated from the clarified water and dewatered to make it denser and firmer, more ready for disposal. During this process, valuable heavy metals and other parts of the sludge can be separated out for reuse elsewhere.
The sludge is first thickened to reduce its water content and volume. This is often done using gravity in a settlement tank. This often reduces the volume by 50% or less.
Dewatering then reduces the water content to around 20%, making its disposal less of a problem. Filter presses offer one effective method by squeezing the out of the tank.
We keep a large range of tanks suitable for every stage in the process of recycling wastewater in the stone fabrication industry. We can supply storage tanks, conical sludge tanks and chemical dosing tanks. All are made from rotationally moulded plastic for many years of service (with a 10-year guarantee).
The non-reactive materials, corrosion and rust-free together with the smooth inner surfaces for easy and complete cleaning make our tanks eminently suitable for the stone fabrication industry. Give us a call to discuss your recycling wastewater in the stone, marble & granite cutting industry needs on 01778 562810.