Solids Removal & Separation Tanks For Screens & Filter Press

Conical Solids removal & separation tanks for screens & filter press are increasingly used with wastewater treatment systems as settlement tanks in conjunction with filter presses and screens.  Sometimes there are lumps of material that escape on the pass-through and this water is run to a conical tank for the particles to settle by gravity.

This enables effective removal and settlementation within the sludge tank. As these larger lumps are heavier than water, they often fall quickly allowing this water to be passed through again a short while later.

Feed Tanks – Common Sizes Used

5,000-10,000 litre Feed Tanks – Our vertical 5,000 and 10,000-litre vertical flat base tanks are commonly used for this application as they can be customised with fittings and flanges to suit product requirements. Flanges with backing rings, blind flanges and level gauges are some of the fittings which can be incorporated on these tanks to connect to pipework for equipment.

Our full range of industrial water tanks is available to view online here.

Settlement / Sedimentation Tanks – Common Sizes Used

For settlement applications, the common sizes of tanks are the 2,000 – 3,000 litre cone tanks for settlement. these are available with a shallow 30 dig cone or a stepper 60 deg cone. common configurations are to have a sludge drain in the bottom of the tank and decant valves up the side of the tank. These are often open-top tank in which raw water is pumped into the top of the tank. This conical tank design with the cone gives effective sedimentation of the suspended solids leaving effluent sludge to be taken away.

Our range of cone tanks start at 50 litres and go up to 30,000 litres and is available to view online here.

Sludge Storage Tanks

Enduramaxx manufacture high-performance sludge storage tanks from polypropylene & high-density polyethene to suit your specific application.  Sludge is a thick, soft mud and typically the by-product of wastewater treatment, industrial wastewater solids and settled suspension from potable water treatment. Often it contains various types of pathogens as well as heavy contaminants, in the case of industrial waste, this can include chemical pollutants. Sludge contaminated by chemical pollutants or heavy metals and demands complex treatment. Other applications are sludge settlement tanks on small sewage treatment plants, the concentration of food and agricultural waste for anaerobic digestion, removal of grit for water reuse on effluent treatment plants and concentration of apple mulch after cider fermentation.

For more details, pricing, and availability on tanks for solids removal & separation tanks for screens & filter press – please get in touch today on 01778 562810.